DOCUMENT

ITB - Automatic Meter Reading Conversion Program 2003

  • YEAR CREATED: 2003
  • ENTITY TYPE: City/Township
  • TYPE OF DOCUMENT: BID - ITB, IFB, ITT, RFB
The document provides technical specifications and special conditions for the procurement of cold water meters and associated equipment for the City of Monroe Water Distribution System. The document outlines the requirements for the meters, including conformity to American Water Works Association standards and the inclusion of an Absolute Encoded register or Encoded register that interfaces with the Itron Automated Meter Reading ERT 50W series. The meters must come pre-installed with the ITRON 50W series ERT, pre-programmed with the City of Monroe ROCL, and equipped with a 3M plug adaptor. They should be shipped as complete units with the ERT attached and programmed, and packaged in numbered boxes for easy identification and tracking. The manufacturer's meter serial number must be clearly imprinted on the outer case and register box lid, and the register unit must be separate and removable from the meter main case. The registers must be magnetic drive, straight reading, recording in gallons, and have a center-sweep test hand. They should be dehumidified, air tight, and permanently hermetically sealed. The document also specifies the appearance and layout of the register dials, including the color scheme and numbering. Additionally, all 3/4" and 1" meter registers must include a low flow (leak) detector, and leak detectors are required for 1 ½" through [the rest of the context is missing].
MEMBERS ONLY DOWNLOAD
Advertisement

Similar Documents

Document
BID - Electromagnetic Flowmeters & Signal Converters 2007
Year Created: 2007
Document
BID - Laboratory Information Management System 2006
Year Created: 2006
Document
BID - Portable Camera System 2002
Year Created: 2002