DOCUMENT

SPEC - 1235 Gallon Polyethylene Tank 2008

  • YEAR CREATED: 2008
  • ENTITY TYPE: Authority: Transportation
  • TYPE OF DOCUMENT: SPEC - Specification
The document is a specification for a polyethylene tank with a minimum capacity of 1235 gallons. It is intended for use in storing herbicides and must meet federal and state safety regulations. The tank should be made of high-density linear polyethylene and have a white opaque finish to inhibit algae growth. It should also have four legs for support and interior baffles to reduce sloshing. The tank should be equipped with an access port with a snug-fitting lid, a fill opening, and a 3/4 inch agitation line. Additionally, there should be a secondary drain outlet with a stainless steel plug located on the top rear of the tank. It should also have bulkhead outlets for a return line and a drain outlet. The document includes specific design requirements and examples of approved tank models.
MEMBERS ONLY DOWNLOAD
Advertisement

Similar Documents

Document
BID - Compressed Natural Gas (CNG)_Vehicle Conversion 2011
Year Created: 2011
Document
ITB - Fuel Tank Phase II Energy Recovery Ventilation Upgrade 2008
Year Created: 2008
Document
ITB - Hydrogen Fuel Trailer Rental 2009
Year Created: 2009