DOCUMENT

SPEC - Jumpsuit - Multiple Colors 2001

  • YEAR CREATED: 2001
  • ENTITY TYPE: Authority: Transportation
  • TYPE OF DOCUMENT: SPEC - Specification
The document is a specification for a jumpsuit to be used by the Louisiana Department of Transportation and Development. The jumpsuit is required to be made of twill fabric, with a composition of 65% polyester and 35% cotton, weighing approximately 5.6 ounces per square yard. It should have a permanent press finish with soil release properties and a maximum shrinkage allowance of 2%. The jumpsuit is available in four different colors: black, brown, dark navy, and gray. The style of the jumpsuit should be a full cut, modern uniform with a one-piece construction. The upper blouse portion should be connected to the trouser portion by an attached belted waistband. The jumpsuit should have either raglan or set-in sleeves, a moderate taper waist, and a full, interlined collar. In terms of pockets, the jumpsuit should have two lower front pockets with a minimum opening of five inches, hung from the waistband and side seam. It should also have two upper breast patch pockets, with the left pocket having a pencil section. Additionally, there should be two back hip patch pockets, with the left pocket having a button, snap, or zipper closure. The waistband of the jumpsuit should be made of self goods and be approximately 1 1/2 inches wide. The back or sides of the waistband should be shirred with elastic. The closure of the jumpsuit should be a two-way zipper from the neck opening to the crotch area, graduated to size, with butted fronts. The stitching of the jumpsuit should have all major seams safety stitched and serged, while all other component seams should be single needle stitched. The sewing should be done with color-fast polyester core thread. The jumpsuit can have different sleeve options, including regular set-in (short or long) with barrel cuffs, or raglan (short or long) with double-faced cuffs and a placket opening with snap or button closure. The jumpsuit is available in various sizes, ranging from extra small to 2XL, and can be furnished in regular or tall sizes as required. It is also mentioned that jumpsuits must be available in sizes for women. The jumpsuit should come with a permanently affixed label that includes information about the fiber, size, brand name, and garment care instructions. The Department emblem should be sewn on both sleeves, 1 inch below the shoulder seam or from the top of the shoulder. The emblem will be provided by the department to the successful vendor. The document also lists approved brands for each color of the jumpsuit. Bidders quoting alternate brands must submit a specification sheet with their bid and may be required to submit an actual sample for inspection prior to award. Any bidder submitting an alternate bid that does not meet all requirements must attach a list of exceptions to the specification.
MEMBERS ONLY DOWNLOAD
Advertisement

Similar Documents

Document
Towing Services RFP
Year Created: 2020
Document
IFB - Junk Vehicles Used for Fire Rescue Training, 2021
Year Created: 2021
Document
ART - Vehicle Fleet Standardization Report 2003
Year Created: 2003