BID - Police Uniform Specifications - Baltim

This document provides detailed specifications for a women's uniform coat and trouser. For the coat, it specifies that it should be made of a 65% polyester/35% cotton twill fabric in navy blue color. The coat should have a notched collar, a plain front with a button closure, and long sleeves with cuffs. The cuffs should taper from 8 ¼ inches at the bottom to 7 ¼ inches at the collar. The facings of the coat should be bound with taffeta binding, and there should be a patch pocket on the left inside facing. Additionally, the coat must be oven baked after pressing to ensure proper finishing. The document also includes information about the limited warranty that should accompany the coat. The warranty covers defects in material and workmanship for a period of three years from the date of purchase. If a covered product becomes defective during the warranty period, the manufacturer agrees to repair or replace it at no charge. For the trouser, it specifies that it should be made of the same 65% polyester/35% cotton twill fabric in navy blue color. The trouser should have a plain front, two quarter top front pockets, and two hip pockets. The front pockets should have a minimum opening of 6 inches and a minimum depth of 5 ¾ inches, while the hip pockets should have a minimum opening of 5 ½ inches and a minimum depth of 5 ¾ inches. The trouser should also have a waistband with a crush-proof hook and eye closure, and the waistband should be constructed using the "closed method" and measure 2 inches wide when finished. The trouser must be cleaned and finished to eliminate loose threads. Other specifications for the trouser include the use of pocketing fabric that is 70% polyester/30% cotton with a durable press finish, the construction of the hip pockets using the double welt method, and the inclusion of a tab to button on the left hip pocket. The trouser should also have a metal memory lock zipper, a minimum of seven belt loops, and a seat outlet measurement of at least 2 ¾ inches. The leg creases should have a silicone bead put in using the Lintrak process, and the stitching should be done with matching thread at a rate of 10-11 stitches per inch. Overall, the document provides detailed specifications for the design, fabric, pockets, waistband, fly, belt loops, seat, creases, stitching, pressing, and finishing of the women's uniform coat and trouser.